Hello folks !!
Reviving this post for some questions about an issue I'm facing !!
I'm surfing through the net for answers and trying stuffs for hours but still can't find any solution.
I have a
Steinberg UR22 mk2 since last september. I've almways connected my MPC 1000 to the audio interface with a Roland cable
1/4-inch TRS (connected in one input of the UR22)
to two 1/4-inch (connected to the stereo outputs L and R of the MPC). I have mostly used this set up connect the MPC to speakers alongside a mic or a mixer (to which is connected a turntable). To me it had always been working correctly this way.
I hadn't used the UR22 for like 2 or 3 months (it were cautiously packed by that time) when 2 weeks I noticed a problem on it. I sent the AI to the suppliers and received it back this week.
Now when I connect the MPC (the same way as before) to the AI, low frequencies are almost off. If I slightly pull out the cable from the AI, everything is fine, except of course some "wind" at a higher level.
I don't get what's wrong with it !!
I also have 2 mono unbalanced jack cables. So I tried to connect both of them to the MPC and to both of the AI's inputs. It works perfectly.
But still I don't get what's wrong with it when I use the "1/4-inch TRS to two 1/4-inch" cable.
NB : UR22 mk2 inputs can be either balanced or unbalanced (
http://download.steinberg.net/downloads ... _om_a0.pdf)
- I have the exact same problem while connecting the mixer to the AI with a Roland cable 1/4-inch TRS to two RCA connectors. I've tried connecting it with other cables (two RCA connectors to mini-jack then plugged into a jack adaptator) and have the same problem. If I connect the mixer (by any mean I have) to the MPC, it works when I slghtly pull out the jack of the MPC input (I'm almost sure the problems comes from the MPC there)
I wanted to have other opinions before buying cables to make different attempts.I had never paid a real attention to cable features until now. After trying and getting information all day I'm getting confused. I hope my explanations where clear !!
Thanks in advance.
Zorkwolf