By Yeke Boy
Mon Oct 30, 2017 10:29 pm
Greetings, I would like to know how to synchronize these 2 MPC's. I am using the MPC 4000 as the main sequencer, and the MPC 60 as an exclave. When I connect one of the outputs of the MPC 4000 to the input of the 60, and an output of the 60 to the input of the 4000, I have synchronization problems (the midi in and out indicators of the 4000 mark as if both were sending continuously midi information and do not respond correctly). I want to do this to be able to shoot the samples from the 60, and in the sequence of the 4000 these midi notes are recorded, and when I start the sequence playback in the 4000, the 60 will respond to these commands. I could just use the pads of the 4000 to activate those of the 60, but I would like to be able to use the pads of the 60 in this way to take advantage of them. I think it is possible that I have to change something in the configuration of the 2 machines. I'm a little lost and would appreciate all the help possible;).