By EchoEko
Mon Sep 05, 2016 4:14 am
The interface is the Focusrite Saffire Pro 40, which has ADAT I/O for up to 8 channels.
I was wondering could you use the 2500's Main Stereo Outs into the Saffire Pro 40's Inputs 1 & 2 (L=1, R=2) for monitoring purposes, then when you get ready to multitrack the 2500, use the Digital Out & connect to the Saffire ADAT In... & record up to 8 simultaneous tracks?
The Saffire Pro 40's manual says once the Saffire is setup in the DAW, that DAW tracks #11-20 will receive ADAT tracks #1-8.
So could this be a feasible way to record
mpc kick ----> adat track 1 (daw track 11)
mpc snare -> adat track 2 (daw track 12)
mpc hats ---> adat track 3 (daw track 13)
mpc toms --> adat track 4 (daw track 14)
and so on until 8 tracks are used...
I was wondering could you use the 2500's Main Stereo Outs into the Saffire Pro 40's Inputs 1 & 2 (L=1, R=2) for monitoring purposes, then when you get ready to multitrack the 2500, use the Digital Out & connect to the Saffire ADAT In... & record up to 8 simultaneous tracks?
The Saffire Pro 40's manual says once the Saffire is setup in the DAW, that DAW tracks #11-20 will receive ADAT tracks #1-8.
So could this be a feasible way to record
mpc kick ----> adat track 1 (daw track 11)
mpc snare -> adat track 2 (daw track 12)
mpc hats ---> adat track 3 (daw track 13)
mpc toms --> adat track 4 (daw track 14)
and so on until 8 tracks are used...