.PGM Maker

There is any software to make Programs for mpc 500?
I think sometimes is a little headache to take like 15minutes assignin samples to pads.
Or there are any tip to easily assign samples?
coz, when you are assignin samples in a program, example: you assign kick02 to pad 11, when you go assign kick03 to next pad the list starts from kick01...
imagine when you are in padbank 'C' assigning until kick32... You know what I mean?

It should sound "weird" and "lazy" but im just searching the "mpc's planet"

Any of the MPC prg makers should be fine, I use the one for the Mac.

they haven't come up with one specific to the 500 (with 12 pad programing), you just have to think differently and use the 16 pad programming.

The first 12 pads of a 16 pad prg will be your A bank on the 500, the left over 4 will be the first 4 on your B bank on the 500.

enotide wrote:Any of the MPC prg makers should be fine, I use the one for the Mac.

they haven't come up with one specific to the 500 (with 12 pad programing), you just have to think differently and use the 16 pad programming.

The first 12 pads of a 16 pad prg will be your A bank on the 500, the left over 4 will be the first 4 on your B bank on the 500.

But you are talkin about any software? for windows?
without mac, there is nothing for windows?

Here's one for the PC.

http://www.midicase.com/mpceditor/

I don't know if this will work, because i don't have a PC.

There are a bunch of threads on this subject, do a search to find out if this is the right one.

Ok, im gonna search... But If somebody know about something, let me know