Q Link / Tuning Bug?

MPC 2500 JJOS 3.42,

I have noticed,

Record events into Track-1 Sequence-1,
Copy Sequence-1 to Sequence-2,
Record Q-Link (- 40 Tune) to Track-1 Sequence-2,
While MPC is running, switching from Sequence-1 (0 Tune), to Sequence-2 (- 40 Tune), operation seems normal,
While MPC is running, switching from Sequence-1 (0 Tune), to Sequence-2 (- 40 Tune),
then back to Sequence-1 (0 Tune), the tuning stays at (- 40 Tune),
only when MPC is stop, and play/start, the Tune on Sequence-1 returns to (0 Tune)

Is this a Bug?

You don't mention you have recorded Tune 0 on Seq1. If not that's normal.

Bugfix you are correct, I didn't record Q-Link Tune 0 on Seq 1

Step Edit.
if I insert the Tune 0 on the last step in the Seq 2 (1Bar Seq btw)
eg; 001.04.95 REAL : TUNE : 0
I will achieve the behavior that I expected.

Thank you for your help Bugfix.

No problem, you can as well put it on first tick of next sequence, it has pretty fast response.