By Zeratonin
Mon Jan 19, 2015 11:26 pm
Hello!
I've been running into the following issue on OS3:
Pad A1 = Kick (set to "Simult A13")
Pad A4 = Snare (set to "Simult A16")
Pad A15 = Sample 1 (set to "Mute Group 1")
Pad A16 = Sample 2 (set to "Mute Group 1")
If I hit A15 or A16, the mute each other as expected.
When I hit A1 or A4, the sounds "Sample 1" and "Sample 2" are played via the simult function, but they are not muting each other any longer. All other parameters assigned to the pad are respected, though.
If this behavior could be fixed it would be a huge help, as it would allow for pads A15 and A16 to be assigned to individual outputs. This is not possible using pad layers (which is my current workaround). Any help on this would be extremely useful for me!
Z.
I've been running into the following issue on OS3:
Pad A1 = Kick (set to "Simult A13")
Pad A4 = Snare (set to "Simult A16")
Pad A15 = Sample 1 (set to "Mute Group 1")
Pad A16 = Sample 2 (set to "Mute Group 1")
If I hit A15 or A16, the mute each other as expected.
When I hit A1 or A4, the sounds "Sample 1" and "Sample 2" are played via the simult function, but they are not muting each other any longer. All other parameters assigned to the pad are respected, though.
If this behavior could be fixed it would be a huge help, as it would allow for pads A15 and A16 to be assigned to individual outputs. This is not possible using pad layers (which is my current workaround). Any help on this would be extremely useful for me!
Z.