JJ OS Bug Reports (ARCHIVE)

1. Sync MPC with Cubase or Live or other Host
2. Press Mode + Pad 16 (Song Mode)
3. Load up a few sequences
4. Play Cubase (Host)

This should play the MPC,

5. Stop Cubase (Host)
6. Rewind Cubase (Host) back to start position
7. Start Cubase (Host)

MPC does not locate correctly. It finds the time on the sequence but not in the complete song mode fashion.

This is totally messing with my work flow. Never had these issues with the original OS V2.1

1.Press mode Pad 15 "Grid Edit"
2. Press "Over dub"
3. Record any sequence, enter some notes.
4. Press Stop
5. Press Undo Seq = BUG Pads will not play any sounds!!!.
6. Press Undo Seq again = Sounds will play.

not really a bug, just an annoyance really! in the load/save/usb screen, the 'Access to:' field defaults to memory card now. i don't use a memory card, hence it's annoying . it's strange cos the load/save screens remain on hard disk.

anyone else getting this?

hereo wrote:

distortedtekno wrote:----------------------------------------------
Bug fix: New OS Ver4.78 30-Jul-2007
----------------------------------------------
[TRIM]
[SHIFT] will move cursor to a sample name.

Does not work.

Read It Rite!!

Can you explain the function better, cause I tried everything and other people are having trouble with this too.

clue: it's a bug fix, as opposed to a new feature

Delete.

delete

delete

in trim edit. pads 13 and 14 do not play any sound.

turn loop on. pads 13 and 14 play sound.

Delete

Today I tested the recordable track mutes feature. The good thing: You can now erase the track mutes in the ERASE screen... didn't know that.

The bad thing: I've recorded some track mutes, but while playing back, the mpc didn't punch the tracks back in again, as I did while recording. They just muted and that was that... seems like the punch in cpmmand is somehow not recorded.

Anybody else having issues with that?

go to "global edit"

press F5 "out"

press F6 "whole"

now press at the same time, buttons F4 and F5. Bug!!! cursor gets stuck at bottom of screen, you can still change the whole parameters. the cursor will move to the top to change program name. and moves to the top right corner. but you can't access the pads or any parameters you wanna change. only way to reset is to go to LFO F3

Also happens in MUTE" F4!

stan steez wrote:Today I tested the recordable track mutes feature. The good thing: You can now erase the track mutes in the ERASE screen... didn't know that.

The bad thing: I've recorded some track mutes, but while playing back, the mpc didn't punch the tracks back in again, as I did while recording. They just muted and that was that... seems like the punch in cpmmand is somehow not recorded.

Anybody else having issues with that?

Do you mean the "track mute: off" event is not recorded? Never happened to me.