By kraftywerk
Thu Jun 21, 2018 7:32 pm
Clearly my 3.5OS MPC3K has some psychiatric issues. This is not the only problem I'm having with it.
I have 32MB installed and it only shows 8MB on startup. 93.4 sec of sampling. I have the optional EXM card removed. I have two sets of 16MBs to test with and one is brand-new. I have a hard time thinking it's the RAM and I have the exact same 8MB out of 32MB issue with both, but I'm happy to be corrected...
If I remove one or both of the RAM cards, 0MB on startup. The RAM appears seated OK and held by the clips. I feel like it would be an all-or-nothing situation were it not seated right, but it's consistently 8MB. So weird.
Any suggestions on where to start troubleshooting?
I have 32MB installed and it only shows 8MB on startup. 93.4 sec of sampling. I have the optional EXM card removed. I have two sets of 16MBs to test with and one is brand-new. I have a hard time thinking it's the RAM and I have the exact same 8MB out of 32MB issue with both, but I'm happy to be corrected...
If I remove one or both of the RAM cards, 0MB on startup. The RAM appears seated OK and held by the clips. I feel like it would be an all-or-nothing situation were it not seated right, but it's consistently 8MB. So weird.
Any suggestions on where to start troubleshooting?