MPC 3000 doesn't recognize ZIP-drive

More info here:

http://akaiscsifaq.digidude.net/akaifaq_scsi_fuse.htm

I think this one would work also?

http://cpc.farnell.com/jsp/displayProdu ... 2-00001000

Thanks for your help Shostakovich.

Can anyone confirm that one of these will work?

http://cpc.farnell.com/jsp/displayProduct.jsp?sku=FF02115&CMP=e-2072-00001000

http://uk.rs-online.com/web/search/searchBrowseAction.html?method=getProduct&R=5176562

seriouz

Shostakovich wrote:I think this one would work also?

http://cpc.farnell.com/jsp/displayProdu ... 2-00001000

Nope... Not this one.

seriouz wrote:
Thanks for your help Shostakovich.

Can anyone confirm that one of these will work?

http://cpc.farnell.com/jsp/displayProdu ... 2-00001000

http://uk.rs-online.com/web/search/sear ... &R=5176562

Neither of these two either.

seriouz wrote:
seriouz

The following are suitable.

http://au.mouser.com/ProductDetail/Tyco ... SOqaG7o%3d

http://au.mouser.com/ProductDetail/Tyco ... 2b2YkKA%3d

Rohan.

Thank you Rohan.

So you recommend polyswitches. I think I'll buy the second one cause I can't find the first one here. What's the difference between them both?

thanks.
seriouz

$0.486 for a fuse but then $39 for shipping? wowzerz. Sh!t i need one..

seriouz wrote:Thank you Rohan.

Ok.

seriouz wrote:So you recommend polyswitches.

Recommended in this very thread by:

Shostakovich wrote:
More info here:

http://akaiscsifaq.digidude.net/akaifaq_scsi_fuse.htm

Mentioned on this and other forums many times.

Used by nearly every SCSI card manufacturer.

Suggested by me again !

Makes sense to replace with a self resetting type.

seriouz wrote:I think I'll buy the second one cause I can't find the first one here.

The first is obsolete.

seriouz wrote:What's the difference between them both?

First is obsolete.

Second is not and its a replacement for the first.

Differences or not are clearly described in the mouser spec page links for each.

The second and current TYCO-RAYCHEM polyswitch linked here:

http://au.mouser.com/ProductDetail/Tyco-Electronics-Raychem/RUEF110/?qs=sGAEpiMZZMu7EFbsM1w0neiVk%2fEVcWQc9thMO%252b2YkKA%3d

...and above already in this thread is an evolved version of one described here:

Shostakovich wrote:
More info here:

http://akaiscsifaq.digidude.net/akaifaq_scsi_fuse.htm

Suggest you read this above link again in full.

seriouz wrote:thanks.
seriouz

Rohan.

For anyone out there looking for these secondary mentioned fuses here states side this is a good place to use. I have used Digi-Key several times for the tact switches thus saving you $39.00 in shipping from Mouser. Digi-Key are totally legit and super fast shipping too.

http://www.digikey.com/product-detail/e ... ND/1045795

This is a pretty dead forum, but does anyone know if these fuses will work?
https://www.ebay.com.au/itm/15pcs-RUEF1 ... Swr85anTaw

They look to be identical to this one Rohan mentioned
http://au.mouser.com/ProductDetail/Tyco ... 2b2YkKA%3d