MPC Customisation

First post, put some thick red pads in and built some custom side panels, 8out and 32mb

No wonder, great

Reminds me of the fire red jordan 3's!

3.50 Vailixi
32 mb ram
Raizin Monster CF
mpc stuff fat pads

mpc 2000xl se3
Hot swap CF drive
Internal CF HD
8 outs
32 Mb Ram
Clear fat pads

MPC 4000
Internal 2.5" 128GB SSD
Green glow in the dark pads
512 MB of RAM
Fully maxed out

Some time ago we've finished some projects:

AKAI MPC 60:

Photos before: https://www.facebook.com/media/set/?set ... 468&type=3

Photos after: https://www.facebook.com/media/set/?set ... 468&type=3

AKAI MPC 1000 black/green

https://www.facebook.com/audiocustompl/ ... 8395701188

AKAI MPC 1000 gray

https://www.facebook.com/media/set/?set ... 468&type=3

looks like my mpc1000! man i got to get me some black knobs..........pause.

Nice colors!

good day!
what can you suggest to use to refresh MPC3000 wheel? i mean to renew it's grey colour.
it's fretted on the sides
and maybe you can suggest where i can buy close to new side panels and arm rest for original mpc3000? maybe someone is selling? or wood sides? (but not mpc-stuff - i bought wood sides for my mpc2500 and they are very bad quality: dont even fit the screw holes and sides itself, ghostinmpc is good i think, but 300$ is too big)

Hi,
Try to ask https://m.facebook.com/dopeshhtonly?ref ... peshhtonly

I started to replace the old worn out tact switches on one of my MPC2000XL with newer switches. You can definitely feel the difference and hear it too.
While I had the XL torn apart, I decided to swap out the old green LEDs with ultra violet LEDs.

Had to Re-invigorate this post! I got bored with my Bone Stock 5000, and decided to slap some paint on it and spice it up a lil bit. I revived the EndCaps, Arm Rest, and LCD Housing. Blacked out the Transport Buttons, and Some Keypad buttons. Whited Out most of the Buttons, Slides and Rotary Dial. Finished it with Thick White Pads. Still have to tweak a few things tho. I'm gonna Revive my 2500 in a couple days as well!