By amenphetamine
Thu Dec 28, 2017 3:30 pm
Can someone who owns or has experience with S1000 confirm, whether you can monitor incoming audio regardless of the page you are in?
For example, MPC60 can monitor audio from any screen if the "Monitor" field is set to "ON" in "Sample New Sound" page. MPC3000 does not have this feature, and you can monitor the audio only from the "Sample New Sound" page.
S1000 manual says:
What I'm not getting is if parameter "ON" allows to monitor audio from "EDIT SAMPLE" pages only, or really from any page à la MPC60.
Anyone?
For example, MPC60 can monitor audio from any screen if the "Monitor" field is set to "ON" in "Sample New Sound" page. MPC3000 does not have this feature, and you can monitor the audio only from the "Sample New Sound" page.
S1000 manual says:
Monitor
The "monitor" parameter allows you to choose how you will listen to the recorded source as it is passed through the S1000 ("audio THRU"). Setting this parameter to OFF will never allow the sound to be passed through the S1000 to the outputs (if you're recording with a microphone and want to avoid feedback) - and setting it ON will always pass it through to the outputs. Setting it to AUTO will enable the input signal to be passed through only when recording a sample or preparing to do so (in the REC2 page).
What I'm not getting is if parameter "ON" allows to monitor audio from "EDIT SAMPLE" pages only, or really from any page à la MPC60.
Anyone?
"The Edge... There is no honest way to explain it because the only people who really know where it is are the ones who have gone over."
― Hunter S. Thompson