By
Idiom
Sat Sep 25, 2010 2:35 pm
Hey everybody, Im new to the MPC forums. I've been reading posts on here for a while now before I joined.
I have an MPC1000bk...and my pads are doing weird stuff. One day out of the blue pads 9-16
are completely garbled...they don't trigger samples AND they will trigger samples from other
pads all at once (poo!). If you push pad A12 for example, it triggers pad A16, then push it again
and it triggers pad A14, then A15..in no particular order, it's as if the pads don't know which pad
it really is. but this is only happening with 9-16. AND they are double tapping,even tripple tapping.
Do I need to replace my pad sensors, my pads, switch the OS?
I WILL NOT Mod my MPC to "fix" it. I don't believe the problem should be fixed by modding anything...it may result in breaking my MPC.
Also, on a seperate note, the effects have never worked...switched OS back and forth and still don't work. Not a huge problem..but Im STARTING to think that the MPC1k is a total waste of money. Especially since most of the MPC1000 users online suggest so much modification.