By oldskl1
Fri May 11, 2018 12:28 pm
Hi There
I have a 2kxl with the 8 output expansion.
At the moment I have a 10 channel mixer (5 mono 4 stereo). Before today I ran the stereo output from the mpc to one of the stereo inputs of my mixer so all the sound from the mpc came out there.
Today I decided to assign one pad (which had a kick drum on it) to output 1 on the mixer inside the mpc, and then obviously connected a 1/4 jack from output 1 on the mpc outboard to track 1 on my mixer.
However when I hit that pad, I'm getting that audio from that pad on channel 1 on my mixer and the stereo output channel of my mixer.
I had hoped that as this pad was assigned to a separate channel in the mpc it wouldn't come out of the stereo output channel and would only be sent to output 1 but this isn't the case.
Is this working as intended or am I missing something here? I did read the manual but that section is pretty empty but apologies if I'm just being blind
I have a 2kxl with the 8 output expansion.
At the moment I have a 10 channel mixer (5 mono 4 stereo). Before today I ran the stereo output from the mpc to one of the stereo inputs of my mixer so all the sound from the mpc came out there.
Today I decided to assign one pad (which had a kick drum on it) to output 1 on the mixer inside the mpc, and then obviously connected a 1/4 jack from output 1 on the mpc outboard to track 1 on my mixer.
However when I hit that pad, I'm getting that audio from that pad on channel 1 on my mixer and the stereo output channel of my mixer.
I had hoped that as this pad was assigned to a separate channel in the mpc it wouldn't come out of the stereo output channel and would only be sent to output 1 but this isn't the case.
Is this working as intended or am I missing something here? I did read the manual but that section is pretty empty but apologies if I'm just being blind