By MalaKai
Sat Jun 24, 2017 3:22 am
Good stuff.
New videos on the JJOS YouTube Channel, they're obviously smarter than me because they realized you can bypass CF internally by just using a SD -> IDE connector, which I didn't even realize existed. My only concern now is how vibrations from hitting the pads may affect this setup without a tray. In my case I only have the new HDM-10 from MPC-Stuff, so it would just sort of hang in the vertical center of the HD slot area. Maybe with some tinkering this can be alleviated, but for the most part the worst that could happen is it would eventually come loose. Glad I was able to tie together all the relevant info.
New videos on the JJOS YouTube Channel, they're obviously smarter than me because they realized you can bypass CF internally by just using a SD -> IDE connector, which I didn't even realize existed. My only concern now is how vibrations from hitting the pads may affect this setup without a tray. In my case I only have the new HDM-10 from MPC-Stuff, so it would just sort of hang in the vertical center of the HD slot area. Maybe with some tinkering this can be alleviated, but for the most part the worst that could happen is it would eventually come loose. Glad I was able to tie together all the relevant info.