Post your questions, opinions and reviews of the MPC1000. This forum is for discussion of the OFFICIAL Akai OS (2.1). If you wish to discuss the JJ OS, please use the dedicated JJ OS forum
By 7even18 Mon Nov 16, 2015 10:09 am
These knobs have been a side project of mines for a while.
My main goal was to upgrade the plastic factory knobs to
a pair of custom made aluminium ones specifically for the
mpc1000. The current ones do the job, but I wanted
something a bit more finessed.

Plastic vs aluminium:

Image
Image
The design is taller(but not too beefy) and slightly wider for nice
feel, the knobs rotate nice and smooth. I took the time to make
sure that the design was sturdy and functioned properly.

Image
I took the time to put an indicator, chamfered the top edge, knurled
the sides for grip and to push it a bit further I've put a set screw on
the side to make sure the fit is snug on the pots shaft.

Image
For finishing I've bead blasted them to give them a clean matte look, its
more a gun metal/titanium colour verses a bright silver. If I have a need
to paint them they'll have a nice texture to hold primer and paint. The
bottom is bead blasted, the one shown here is unfinished. All in all
looks fresh.

These knobs haven't made my music sound better. I've produced a few
pairs, pm me if anyones interested.
User avatar
By medearis Tue Apr 12, 2016 11:40 pm
These make me want to actually finish up my blue MPC...
Been needing new pads for like two-three years? So hard to spend the money there VS impulse record buys and sh*t for my drums.

Poor baby... I don't mean to neglect you, it's just, it's.... I just need to remember that building each other is part of real love.
You've built me, darling, now I must build you!
By seadozer Sat Sep 03, 2016 12:45 am
Image

:-D

128MB, 160GB HDD, fat pads and black buttons/knob from mpcstuff.

I also got some black knobs for gain/vol (the ones that look like Moog knobs) but wasn't happy with how they attach to the pot so for now I'll stick with the factory ones, I might paint them and the CF slot pink.

Also, I was planning on replacing a few tact switches but the new buttons have surprisingly improved the response so I think I'll leave them for now.
By aprim Tue Feb 07, 2017 5:16 pm
I just finished mine!
new pads
new qlink board
new rightside board
new f1-f5 board
new endcaps
blackout buttons
New Knobs
Painted my QLink Sliders Black and red
New Black Casing, the original was scratched up and dented.

Image

You can't really tell in this pic but the case was jacked up and had some scratches. It was dented by the card slot too.
Image
Image
Image

I also de-yellowed a MPC 4000 Buttons.
Image

Image

Image