By maxxcrowe
Tue Nov 05, 2019 6:18 am
Howdy, Long time reader but first time poster, so pardon me if my formatting is incorrect.
Recently I have switched from a zip drive to a card reader. I updated my mpc to 1.20, got my CF card and reader, and thought everything would go nice and dandy. I have actually had quite a bit of trouble with getting it to work. The card reader is not hot swap able, so I must boot the MPC with the card in it, but when I try to load it up, the screen glitches and is completely unable to use. I have formatted the card to fat32 and fat16 and neither work. I have tried different IDE cables. I do not know what to do, and I was wondering if anyone had suggestions or had experienced this before
I will include some pictures of my issue, and what card I am dealing with: https://imgur.com/gallery/RFUupBt
any help would be appreciated, thank you
Recently I have switched from a zip drive to a card reader. I updated my mpc to 1.20, got my CF card and reader, and thought everything would go nice and dandy. I have actually had quite a bit of trouble with getting it to work. The card reader is not hot swap able, so I must boot the MPC with the card in it, but when I try to load it up, the screen glitches and is completely unable to use. I have formatted the card to fat32 and fat16 and neither work. I have tried different IDE cables. I do not know what to do, and I was wondering if anyone had suggestions or had experienced this before
I will include some pictures of my issue, and what card I am dealing with: https://imgur.com/gallery/RFUupBt
any help would be appreciated, thank you
