By hemogoblin
Thu Jan 20, 2005 6:01 pm
Can someone fill me in on how to set the mpc up to play 2-3 snares with one pad? is it possible with the 2KXL? Or can I have one pad trigger multiple pads?
By unphaseable338
Thu Jan 20, 2005 6:45 pm
i Got the 2000, in the "params" section of the program you can choose to have one pad play 1 or 2 other pads with it. sorry if this is alittle vauge, im at class right now. if you dont understand let me know and i will look and tell you exactlly.
By itchyvinyl
Thu Jan 20, 2005 6:52 pm
Hit SHIFT+6 for the program section.
Hit DRUM1 (if that's the program you're working on)
You'll be on the ASSIGN screen
Hit the pad that is your main snare
Go down to MODE: and change setting to SIMULT
Where it says ALSO PLAY NOTE:, dial in the pad number of the additional snare(s) that you want to trigger.
Hit DRUM1 (if that's the program you're working on)
You'll be on the ASSIGN screen
Hit the pad that is your main snare
Go down to MODE: and change setting to SIMULT
Where it says ALSO PLAY NOTE:, dial in the pad number of the additional snare(s) that you want to trigger.
By Ekl1p5e
Sat Mar 19, 2005 9:45 pm
Will it also work for Midi modules?
Does it save with the track or do you have to set it up each time you turn on the MPC?
And also when you are assigning note numbers to the pads, do they save or do they have to be setup each time the machine is cut on?
Thanks
Does it save with the track or do you have to set it up each time you turn on the MPC?
And also when you are assigning note numbers to the pads, do they save or do they have to be setup each time the machine is cut on?
Thanks
By ^Owni
Tue Mar 22, 2005 12:55 pm
When i use the SIMULT mode, my snare sometimes sounds Robotic, i than DUB it...
By nanoloop
Tue Mar 22, 2005 11:21 pm
^Owni wrote:When i use the SIMULT mode, my snare sometimes sounds Robotic, i than DUB it...
your next challenge... phasing.. try altering the attack and decay or different snare you have on simult mode.