Technical questions for the MPC2000xl and the MPC2000

By 4dahaterz Fri Jun 10, 2005 8:39 pm
GooDgUyThaTgUy wrote:The Discman has two 1/8" slots, one is Line Out the other is for Headphones. The plug I have has one 1/8" plug on one side, the other side of the cord has 2 plugs, one white, one red like this cord minus the yellow plug...

Image

...so I'm assuming I need to go to radioshack, buy 1/4" plug adapters for the red plug and the white plug so I can fit them into record in/out. Or get a discman with Digital Out so I dont need the 1/4" plug adapters and can just plug the red and white plugs into Digital In/Out. Is that about right?



u can actually use that, but u need the 2 1/4 inch adapters like what dude listed above earlier, see the cable u have picture is a video cable wit two audio ends, u just cant use the video one, which is the yellow one...but its cheaper to take that cable back to radio shack and get this cable Image
and get this adapter Image

By 4dahaterz Fri Jun 10, 2005 8:40 pm
GooDgUyThaTgUy wrote:
4dahaterz wrote:
GooDgUyThaTgUy wrote:I used to use my cousins MPC alot and I remember the discman had a red/white cord coming out and that plugged right into DIGITAL IN/OUT. The discman Im using now has a Line Out Slot and the Headphone slot. I need to find a discman that has a Digital Out slot not just a Line Out slot to sample from? And for the record player, I need to plug the red/white plugs coming from the player into a DJ Mixer and than from the mixer I plug 2 1/4 plugs into the MPCs Record In/Out?


No, that Discman will work.... get a cable from the electronic store that will be stereo "1/8 stereo plug on one end, and also on the other end "1/4 inch that splits into left and right like this one except a lil longer so it can go to the MPC comfortably from a nice close distance....Image


Ok excellent, and I can find that at like Radioshack or a similar store?
yes sir
User avatar

By TicToc Sat Jun 11, 2005 1:52 am
Ive said it before and I'll say it again.

You dont HAVE to be a DJ to get into beatmaking, but it sure does help. Then you wouldnt be so lost with all these wires and connections. Glad these guys were patient enough to help, I wouldnt be.