Technical questions for the MPC2000xl and the MPC2000
User avatar
By peterpiper Fri Dec 06, 2013 3:37 pm
ntalec wrote:
peterpiper wrote:external MO-Drive that allows 230MB discs (If you want more, many drives also allow 640MB discs). These discs/drives are very durable.

peace


But you still have to deal with the 2k file management which makes for a headache on most media.


No doubt, the ability to have folders is a plus on the xl but I don't find it too bad on the 2000. I split most of my MODisks(230MB) in partitions of 10MB (Partitions A to V) which in my case is enough to hold data of ca 3-4 tracks. Yes, it forces me to name the samples correct so I don't overwrite samples that have the same name but on the other hand this is not a bad thing (I like to know where the sample is from so I don't use names like sound001 or kick01 etc)
On MODisks with only samples I use less but bigger partitions A to I with 25MB each or A to E with 45MB each but that is only for very long uncutted samples.

peace


peace
By ntalec Fri Dec 06, 2013 5:50 pm
peterpiper wrote:
No doubt, the ability to have folders is a plus on the xl but I don't find it too bad on the 2000. I split most of my MODisks(230MB) in partitions of 10MB (Partitions A to V) which in my case is enough to hold data of ca 3-4 tracks. Yes, it forces me to name the samples correct so I don't overwrite samples that have the same name but on the other hand this is not a bad thing (I like to know where the sample is from so I don't use names like sound001 or kick01 etc)
On MODisks with only samples I use less but bigger partitions A to I with 25MB each or A to E with 45MB each but that is only for very long uncutted samples.

peace


peace


:nod: That pretty much why I either use floppies or a partitioned hard drive with the 2k or the 60.
The partitions pretty much are your folders.
Not the best method but it what you have to go with on those older models.
By ntalec Fri Dec 06, 2013 7:51 pm
distortedtekno wrote:Thanks Peter. I tried searching for MO drives on the web, but I didn't find what I was looking for. Do you have any good links to share? :)


magnetic optical disk
Searching for that should get you there.
User avatar
By distortedtekno Fri Dec 06, 2013 9:28 pm
ntalec wrote:
distortedtekno wrote:Thanks Peter. I tried searching for MO drives on the web, but I didn't find what I was looking for. Do you have any good links to share? :)


magnetic optical disk
Searching for that should get you there.

Thanks. I feel like a newb over here. But for real, I've been running around like a maniac. Today I get the day off to spend more time catching up on the learning curve and make some beats while I got the time. :)
User avatar
By peterpiper Sat Dec 07, 2013 2:36 am
:shock: not the type of drive I ment :) Like I said, I use 230MB disks. There are a few drives that read/write 128MB disks only and then other drives that read/write 128 to 230 or up to 640MB

I got 2 of these

http://www.ebay.com/sch/i.html?_trksid= ... 2&_sacat=0

and 2 of these

http://www.ebay.com/sch/i.html?_trksid= ... &_from=R40

I bought them in 2008 for near than nothing (just checked the old ebay mails and realized that I paid not more than 5 EUR for each drive)
I guess prizes are higher today but you might get a good deal if you wait and watch ebay.

If you buy this you'll also need an external SCSI case. You can try to find an empty case but you'll find more and often cheaper ones in the scsi cd section. Also do try to find it in thrift shops, flea market etc you can get these really cheap if you keep your eyes open (to be honest IDK about the prices in the US :))
simply replace the cd drive with the MO drive (the mo drive is 3.5 so to fit into the case you'll also need an 3.5 to 5.25 adapter:

http://www.ebay.com/itm/3-5-to-5-25-COM ... 2319bf71c8

Yes this might seem like no fun for some people. It depends on the type of person you are. I really like to wait and look out for stuff to get it cheap and build things together by myself. You probably don't like DIY stuff etc and so this route might not be yours. Then you really should think about getting a XL.

peace
User avatar
By distortedtekno Sat Dec 07, 2013 3:26 am
Thanks Peter. I was looking at those earlier, but wasn't sure if there was anything I can do with them. But since I've seen a few good prices, I'll hunt down an external SCSI case and go for it, since I'm very much a DIY guy. I've done tons of repair/replacement/customization on my MPC1000 before I sold it, built a x0xb0x 7 years ago, circuit-bent all kinds of drum machines, speak & spells, and now I want to bend the Akai S-01 and S20. That's gonna be fun! :nod:

http://www.circuitbenders.co.uk/synthmod/S01.html

http://www.circuitbenders.co.uk/synthmod/S20.html

:smoker: