Technical questions for the MPC2000xl and the MPC2000
By rbirri Sat Jul 18, 2009 9:04 pm
Hi all

Do you know if there is a onboard battery on the 2000xl ?

If so, is it possible to change it ?

Thks
User avatar
By mr_debauch Sat Jul 18, 2009 9:21 pm
i somehow dont think there is a cmos battery on it...

what is the issue with your machine?
User avatar
By mr_debauch Sat Jul 18, 2009 9:28 pm
do you have the ram expanded? if so, remove the ram and try re-booting the machine. see if it helps... if it does then replace the ram.
By rbirri Sat Jul 18, 2009 9:34 pm
Already done that.

I have tried with and without the ram modules.

The MPC boots and BAM I have this dumb error message.
User avatar
By Lampdog Sun Jul 19, 2009 5:02 pm
I think almost all of us have seen that error once or twice.

Reinstall your os maybe.

Reformat your media that u r using.

Don't push buttons so fast when producing/playing around.
By rbirri Sun Jul 19, 2009 6:29 pm
Yeah I know this is a common error. I had it from time to time.

But what is not that common is that I have it each time I boot my MPC.

I did reinstall the OS, and still the same result.
User avatar
By JUKE 179r Mon Aug 17, 2009 1:00 pm
check your connections inside of the MPC. start at the media reader/floppy drive.
User avatar
By SMC Mon Aug 17, 2009 6:10 pm
Ah ha! The ever infamous!

I had this after copying over a whole bunch of files from one MP to another.

Have also had it after loading a bunch of samples to media.

Corrupt files is what caused it in both cases for me.

If you can't iron it out trying everything stated here, then it's a bad MP and you should sell it to me.
User avatar
By Maxillaa Mon Aug 17, 2009 6:15 pm
Lampdog wrote:I think almost all of us have seen that error once or twice.


happy to be a 2000 classick user..... :D