By inflict3
Tue Sep 21, 2010 5:43 pm
wow!! this is sick!!
Tapuno wrote:No, its not the fat **** I was supposed to **** but never did.
And, no that is not a dude. Its my sister.
Tapuno wrote:No, its not the fat **** I was supposed to **** but never did.
And, no that is not a dude. Its my sister.
Amber wrote:The pic didn't load for me before. So did he cut the cable and flip the other over then solder? I don't understand the inverted part.
I take it you just sand the plastic off both cables to get to the wires, join them with solder, put electrical tape around it and that's it?
scsiforsamplers.com wrote:That was the point of my earlier post - do it cable-to-cable, because you have a much smaller risk of heat damaging any components. Unless you are an expert with the soldering iron, I'd avoid taking the first option MPCHunter described.
mr_debauch wrote:scsiforsamplers.com wrote:That was the point of my earlier post - do it cable-to-cable, because you have a much smaller risk of heat damaging any components. Unless you are an expert with the soldering iron, I'd avoid taking the first option MPCHunter described.
unless you are an expert with a soldering iron... I would avoid doing this mod all together. **** playing with a delicate 300 dollar bill right there! hahaha!
manimani wrote:I succeeded install DPS12 Screen.
Flat cable of DPS12 Screen is inverted array MPC2000's one.
MPC2000's flat cable separated LCD,and Soldered with Flat cable of DPS12 Screen.
[/img]
Grenozh wrote:jazzbee wrote:lol maybe its time to switch to Hip Hop Ejay
double fixed