MPC 2000 freezing up

Its not mine but my mates MPC when your in the load screen im not sure if its the flash memory screen of the floppy screen but it gets frozen on "waiting". Has anyone seen this problem before or have and solutions ?.

I had the problem with a broken zip drive.
change it and try it again.

There is no SCSI hooked up ?, would this be the same sitution with the 8MB Flash ROM board and floppy drive ?.Can you remove the 8MB Flash ROM board if it is a problem and if so would the MPC return to normal ?

I quess.
but first try another cf disc. Probably its broken.
if it still dont work change the drive you have chosen to load/save.

I booted it up and it gets stuck on the SCSI section, it just says waiting but there is no SCSI hooked up. Could it be possible that the SCSI board/fuse is busted?

is the scsi device terminated? did you make sure you are not using scsi id 6?

mr_debauch wrote:is the scsi device terminated? did you make sure you are not using scsi id 6?

There is no SCSI device connected to the MPC 2000.

yepz wrote:

mr_debauch wrote:is the scsi device terminated? did you make sure you are not using scsi id 6?

There is no SCSI device connected to the MPC 2000.

well I dont know then... when you push open window what is the default device?

How ?, i can scroll to the floppy, flash and then when i scroll over again i just get the "waiting"

check the scsi fuse with a multimeter to see if its blown.
If it is replace it and hopefully theis issue should be fixed.