Technical questions for the MPC2000xl and the MPC2000
By Boro Fri Feb 22, 2013 9:50 pm
My MPC 2000xl will not turn o. When I was repairing input card reader in the MPC, I plugged in to the mains. After got a short and jumped cap at home. MPC still will not turn on. Do I have to buy a new mainboard or just the Akai MPC 2000XL buy Power SW Block Child Board?
By Clint Fri Feb 22, 2013 9:58 pm
Probably best if you get someone to look at it, but check all the fuses first and look for blown capacitors or any other obvious signs of damage. If its DOA, it may just be cheaper to get another MPC if thats an option for you.
By Boro Fri Feb 22, 2013 10:02 pm
clint246clint wrote:Probably best if you get someone to look at it, but check all the fuses first and look for blown capacitors or any other obvious signs of damage. If its DOA, it may just be cheaper to get another MPC if thats an option for you.

Other obvious signs of damage?
User avatar
By SimonInAustralia Fri Feb 22, 2013 11:42 pm
Boro wrote:My MPC 2000xl will not turn o. When I was repairing input card reader in the MPC, I plugged in to the mains. After got a short and jumped cap at home. MPC still will not turn on. Do I have to buy a new mainboard or just the Akai MPC 2000XL buy Power SW Block Child Board?

What is "got a short and jumped cap"?

Did you blow a fuse, then try to power it up with the fuse jumpered/shorted, so it was being powered up with no fuse and a piece of wire or something else across the fuse holder? That is really dangerous, if you did.

If you did blow a fuse, get some new ones of the same value, and replace the blown fuse before trying it again.

What happens when you try to power up the MPC, does the LCD backlit output any light, do the MPC front panel LEDs light up, or is it totally dead with no lights or other signs of anything working?
By Boro Sat Feb 23, 2013 12:01 am
got a short and jumped cap = short circuit in the MPC and corks popped and turned off the electricity at home

MPC front panel LEDs is it totally dead with no lights or other signs of anything working.

At the beginning I need to replace fuses?

It seems to me that I have to buy a new motherboard or Power SW Block Child Board.
By Heavie Sat Feb 23, 2013 1:16 am
What kind of beat was you making, to do so much damage? I like to hear this beat, but I'm afraid it my blow my shit.
By Clint Sat Feb 23, 2013 1:18 am
Boro wrote:got a short and jumped cap = short circuit in the MPC and corks popped and turned off the electricity at home


Over to you Simon...
User avatar
By SimonInAustralia Sat Feb 23, 2013 1:23 am
clint246clint wrote:
Boro wrote:got a short and jumped cap = short circuit in the MPC and corks popped and turned off the electricity at home


Over to you Simon...

Still scratching my head at that one. :lol:

I think maybe something is getting lost, or found, in translation.
By Clint Sat Feb 23, 2013 1:26 am
Im picturing dude sitting at home in the dark drinking champagne with a fried MPC.
By Heavie Sat Feb 23, 2013 1:28 am
clint246clint wrote:Im picturing dude sitting at home in the dark drinking champagne with a fried MPC.


:| :lol:
By Clint Sat Feb 23, 2013 1:51 am
Boro wrote:Other obvious signs of damage?


Yes, like burnt components.

Im not sure if your MPC needs a voltage transformer in Poland, is it a 110v or 230v model?
By Boro Sat Feb 23, 2013 9:52 am
clint246clint wrote:
Boro wrote:Other obvious signs of damage?


Yes, like burnt components.

Im not sure if your MPC needs a voltage transformer in Poland, is it a 110v or 230v model?

230 V
By Boro Sat Feb 23, 2013 7:31 pm
I replaced the fuse and 2 times the burned twice, so the motherboard is certainly a good.

How many fuses in the MPC?