By grusl
Thu May 21, 2015 2:25 pm
Hey,
a friend and me just purchased the "Gotek SFR1M44 U100 USB Floppy Drive Emulator" on amazon for his MPC2000. The Emulator runs fine and we formated a 1,89GB USB Stick with Fat DOS 1,44MB Partitions. We put the Akai Professional MPC2000 System Disk 1.72 on the first formated partition of the usb stick 00. Loading the operation system works also fine.
Can someone please explain how to save and load a project onto the usb stick?
Because "Unfortunately if you try to save more than 1.40mb then get the "please insert new disk" message it will not acknowledge that you've pushed the button to next disk" on the Gotek Emulator.
We have set the jumper on S1 (Driver select 1, second from left).
We tried to save each sample manually on different partitions (partition 06-08) on the usb stick. Then we saved the APS and the ALL file on partition 09. We turned of the MPC and tried to load the project, but the MPC can only load 1 partition at time from the Gotek Emulator.
So we tried to load each SND sample manually from each partition (that worked), but after loading the APS file, the samples we loaded before manually are not loaded into the MPC memory anymore.
We suppose we have to save individual PGM files?
Greetings from Germany
a friend and me just purchased the "Gotek SFR1M44 U100 USB Floppy Drive Emulator" on amazon for his MPC2000. The Emulator runs fine and we formated a 1,89GB USB Stick with Fat DOS 1,44MB Partitions. We put the Akai Professional MPC2000 System Disk 1.72 on the first formated partition of the usb stick 00. Loading the operation system works also fine.
Can someone please explain how to save and load a project onto the usb stick?
Because "Unfortunately if you try to save more than 1.40mb then get the "please insert new disk" message it will not acknowledge that you've pushed the button to next disk" on the Gotek Emulator.
We have set the jumper on S1 (Driver select 1, second from left).
We tried to save each sample manually on different partitions (partition 06-08) on the usb stick. Then we saved the APS and the ALL file on partition 09. We turned of the MPC and tried to load the project, but the MPC can only load 1 partition at time from the Gotek Emulator.
So we tried to load each SND sample manually from each partition (that worked), but after loading the APS file, the samples we loaded before manually are not loaded into the MPC memory anymore.
We suppose we have to save individual PGM files?
Greetings from Germany