MPC 2000xl NV slide pot replacement part

Looking for the replacement NV slide/fader for the 2KXL, also I'm located in Australia- (shipping from MPCparts is a ridiculous)

I've searched and searched but come across old posts with dead links or no information given about specifics.

On that note, for any mod that's reading, I would highly suggest a sticky for alternative replacement parts and their part numbers- I guess that would make it easier for everyone.

Thanks in advance for anyone that can help

in this thread jvc says its a 10k ohm pot (for the classic at least)
viewtopic.php?f=1&t=138297

JVC wrote:Digikey / mouser part #
...
variation slider 7455 10KB2X2, 713K 10KRX2 10KB2X2, 10K ohm fader (60 x 8 x 7mm)

http://www.ebay.com/itm/111355738867?_t ... EBIDX%3AIT

I found this on eBay, wondering if that would work.

unfortunately vstrepairs is an extra 15aud shipping ontop.

thanks

it might be worth the extra money because of the certainty that it will be the correct part. Else you can reference the MPC2000XL service manual for the exact part number and look for it that way.

also related tip, when taking apart the MPC, use an ice tray to keep all the different screws.

@fknchino... have you tried to clean/vacuum out your NV slider? Or is it totally ****?

Mouser has them for $3.50. Not sure about international shipping rates. I paid close to $6 to New York. Total came out to $9.22.

http://www.mouser.com/Search/ProductDetail.aspx?R=RS45112A6A05virtualkey68800000virtualkey688-RS45112A6A05