By roisindubh83
Wed Apr 11, 2018 10:39 pm
I wanted to post a more in depth instructions for those using this on there mpc 2000 or 2000 xl , it could also probably work for other mpc in general , I spent days trying to figure out how to use this drive it came with zero instructions most videos I felt people were more so showing off that they got it to work and really didnt explain. More than a few articles and forum posts I saw that people using certain programs on there pc could only truly get there usb drive to partition too 100 1.44mb. I found out a hybrid solution using a free program , and a tendak usb floppy drive. Both Gotek and Tendak drive were just under 50$ us.(using windows)
1.)Turn off power to mpc and open it up basic screw setup get the backing and control panel board off mpc and gently remove hard drive, detach the cables and put gotek drive in place attach the two cables, put everythig back on mpc .
2.)Download version 1.40i from the free software company called IPCAS http://www.ipcas.com/support/usb-floppy ... nload.html, this is the program you will use to format one of your usb with this . Here is the quick steps to use the disk emulator program after instalation I do believe there youtube videos showing how to.
a.)Put in usb flash drive ,open program top left corner you will see the drive you plugged in go to the drive and right click format, keep in mind this will erase anything previous on that flash drive.There will be a window prompt pop up make sure you set the partition to 100 it will break the drive into 100 1.44mb folders essentially and make sure you click the dos option this will add a dos prompt to each folder you only need it in one but it makes it easier and you can always delete with a click in the folder. hit format it will ask you if your sure or not just dot it, and your usb is now partioned in a way your mpc can understand.
b.)On the right of the screen you will now see or should now see the 100 partitions click on the very first partition this will be the very first file your gotek drive will read to the mpc, you will see the three dos boot files you need this for the boot up part.
c.)Plug in Tendak usb floppy drive on my computer the drive read was A, insert your boot floppy I have 1.72 and it will read it like any other hard drive open the drive folder and you should see three files for the OS boot up , highlight those files and drag them in the first folder in your ipcas program, unplug usb plug into gotek drive power it up to show that it works and will boot from the first partition on that storage device.
What few have explained about the GOTEK drive is that there are two buttons that serve functions of scrolling through the partitions inside of mpc or what ever compatible and when the usb is unplugged it also has a few functions because of its internal memory its to set read or writing modes that allow it to be transported info from pc to mpc etc, that part is tricky and where I think should be written about or explained more . So the concept is that you really dont need to format usb on pc the idea is that it formats from the GOTEK drive itself and partitions to 1000 on its own which is amazing considering it eliminates the need for possible faulty drives or disks. The only problem I ran into is that when you go through the partition process it wipes the OS so you need to find a way to boot mpc after you partition gotek drive if that makes sense. So I figured I would make two compatible forms of using usb drive with mpc 2000.
2.)Now that you have a 100 partitioned boot drive , you can now setup and partition the second usb.
a.)plug in second usb into the gotek drive make sure that it isnt turned on and hold in the two buttons on the drive and power on machine you will see it start to count up once you see that let go it will go up to 998 or so once its done creating your 1000 partitions you will notice now that after you power off it will give you a disk error message or something. power machine back off, you second usb is now successfully partioned and formated to use fully on your mpc......but now you notice there is no OS boot on the new second usb.
b.)plug second drive into pc you will notice it will be name fl000 or something like that and it will seem that the whole drive is the size of a floppy disk that is just the first partition on your gotek drive the pc is registering , no problem though go into the ipcas program make sure usb one is plugged in your pc and open up the first folder like before and you just highlight and copy the files in the floder including the mpc ones and drag them into your second usb drive, you now have a dos boot mpc OS file in the first partition on your usb so you can now plug in mpc power up you now have your boot and a thousand partition usb.
The first usb I use as a back up boot and a way that is easy for me to drag files from old disks to add to and from my pc to the mpc and the second drive is for my main stand in drive I hope this rant made sense to you this method works great for me and I think allot out there searching could be helped .
1.)Turn off power to mpc and open it up basic screw setup get the backing and control panel board off mpc and gently remove hard drive, detach the cables and put gotek drive in place attach the two cables, put everythig back on mpc .
2.)Download version 1.40i from the free software company called IPCAS http://www.ipcas.com/support/usb-floppy ... nload.html, this is the program you will use to format one of your usb with this . Here is the quick steps to use the disk emulator program after instalation I do believe there youtube videos showing how to.
a.)Put in usb flash drive ,open program top left corner you will see the drive you plugged in go to the drive and right click format, keep in mind this will erase anything previous on that flash drive.There will be a window prompt pop up make sure you set the partition to 100 it will break the drive into 100 1.44mb folders essentially and make sure you click the dos option this will add a dos prompt to each folder you only need it in one but it makes it easier and you can always delete with a click in the folder. hit format it will ask you if your sure or not just dot it, and your usb is now partioned in a way your mpc can understand.
b.)On the right of the screen you will now see or should now see the 100 partitions click on the very first partition this will be the very first file your gotek drive will read to the mpc, you will see the three dos boot files you need this for the boot up part.
c.)Plug in Tendak usb floppy drive on my computer the drive read was A, insert your boot floppy I have 1.72 and it will read it like any other hard drive open the drive folder and you should see three files for the OS boot up , highlight those files and drag them in the first folder in your ipcas program, unplug usb plug into gotek drive power it up to show that it works and will boot from the first partition on that storage device.
What few have explained about the GOTEK drive is that there are two buttons that serve functions of scrolling through the partitions inside of mpc or what ever compatible and when the usb is unplugged it also has a few functions because of its internal memory its to set read or writing modes that allow it to be transported info from pc to mpc etc, that part is tricky and where I think should be written about or explained more . So the concept is that you really dont need to format usb on pc the idea is that it formats from the GOTEK drive itself and partitions to 1000 on its own which is amazing considering it eliminates the need for possible faulty drives or disks. The only problem I ran into is that when you go through the partition process it wipes the OS so you need to find a way to boot mpc after you partition gotek drive if that makes sense. So I figured I would make two compatible forms of using usb drive with mpc 2000.
2.)Now that you have a 100 partitioned boot drive , you can now setup and partition the second usb.
a.)plug in second usb into the gotek drive make sure that it isnt turned on and hold in the two buttons on the drive and power on machine you will see it start to count up once you see that let go it will go up to 998 or so once its done creating your 1000 partitions you will notice now that after you power off it will give you a disk error message or something. power machine back off, you second usb is now successfully partioned and formated to use fully on your mpc......but now you notice there is no OS boot on the new second usb.
b.)plug second drive into pc you will notice it will be name fl000 or something like that and it will seem that the whole drive is the size of a floppy disk that is just the first partition on your gotek drive the pc is registering , no problem though go into the ipcas program make sure usb one is plugged in your pc and open up the first folder like before and you just highlight and copy the files in the floder including the mpc ones and drag them into your second usb drive, you now have a dos boot mpc OS file in the first partition on your usb so you can now plug in mpc power up you now have your boot and a thousand partition usb.
The first usb I use as a back up boot and a way that is easy for me to drag files from old disks to add to and from my pc to the mpc and the second drive is for my main stand in drive I hope this rant made sense to you this method works great for me and I think allot out there searching could be helped .