Technical questions for the MPC2000xl and the MPC2000
By KenSable Tue Jun 04, 2019 9:35 pm
Hey y'all, I'm trying to run the 8 outs of my MPC 2kXl into my Tascam board, to then get separate tracks on tape. Problem is, not sound is coming from the 8 outs. I have all the right pads assigned to the outs, and the signal from the headphone jack and stereo outs is working fine.
Am I missing a step here?
User avatar
By Lampdog Thu Jun 06, 2019 10:11 pm
KenSable wrote:I have all the right pads assigned to the outs,



You assigned pads via the mixer right?

Mono samples will give you options of 1, 2, 3, 4, 5, 6, 7, 8.
Stereo samples will give you options of 1/2, 3/4, 5/6 7/8.

User avatar
By Lampdog Sat Jun 08, 2019 2:19 pm
Reseat the 8 outs card?

You have an effects card? Is something in the effects stopping it from being heard?

What type of audio cable and/or any adapters are you using in the individual outs.


Image
By Eyeumbrella Tue Aug 06, 2019 4:47 am
EfX EB16 card effects I assigned to sounds aren't coming through the 8 outs board, only the main stereo and the headphone jack.

#Reward offered to help
resolve this problem.