By liddokun
Wed Jan 06, 2021 5:13 am
I have an MPC2000XL which I'm having a number of issues with.
I had to replace the sensor pad ribbon cable connector. While reinstalling the sensor pad ribbon cable, I very dumbly had the unit powered on. The plate under the sensors shifted a bit and I'm 100% sure shorted something on the top circuit board.
Anyways, things started to smoke due to the R1 resistor completely burning up. I have replaced that resistor, but now the only thing that happens when powered on is all the LEDs and the LCD screen blink on and off at the same time, endlessly. I have attached a video to demonstrate. Has anyone ever come across this issue?
I had to replace the sensor pad ribbon cable connector. While reinstalling the sensor pad ribbon cable, I very dumbly had the unit powered on. The plate under the sensors shifted a bit and I'm 100% sure shorted something on the top circuit board.
Anyways, things started to smoke due to the R1 resistor completely burning up. I have replaced that resistor, but now the only thing that happens when powered on is all the LEDs and the LCD screen blink on and off at the same time, endlessly. I have attached a video to demonstrate. Has anyone ever come across this issue?