mpc to Rane dj mixer

Hey i was wondering if the mpc can be used through the FlexFX of a Rane mixer. If so can i get any help on how to get it to work. thanks

stereo outs from mpc into flex effect inputs. then assign as much of the mpc to each channel as you want wet is more dry is less. think you can monitor the input of flex effects as well in the headphones.

i dont have a rane mixer but this is how i would go about it.

op

The dry/wet arrangement of the TTM56 is not ideal for use as a normal input; it's really a crossfader between the channel(s) on which the FlexFX is engaged, and the FlexFX input signal.

If it's still available, use the Aux input instead; that has a regular fader pot.

If you want to send a signal from the TTM to the MPC (sample from records), use the FlexFX output, which is basically a send; you can switch it on or off per channel, in stead of sampling both channels.

thanks for the help, but what im tryin to do is to be able to have a record playing, then use the mpc through the flexfx to use delay. i want to be able to cut the volume out on the mixer and then still be able to hear delay from whatever part of the song i used the delay on. i dont know how well i explained what i want to do but its kind of hard to explain.

if you want that, get a 303.