Technical questions for the MPC2000xl and the MPC2000
User avatar

By ^Owni Mon May 09, 2005 9:47 am
Back in the days i also wanted to try the MD-route for recording my MPC-output... until some articules showed me MD-recorders cuts of certained
Sound/signal ranges.

By mpc3000 Tue May 10, 2005 2:26 pm
"I cop a usb scsi cable"

And connect it to what? Please explain to us how this would work.
User avatar

By Krux Wed May 11, 2005 12:18 am
I don't know that this is gonna work yo...
User avatar

By pt3r Wed May 11, 2005 6:51 am
King_Vitamin wrote:MD unit has USB 1.0 port.

USB to SCSI adaptor cable. USB from minidisc, SCSI to mpc.

And I'm still hunting around for one.


That will definately NOT work. Since those SCSI-USB cables need driver software and your MPC can not run those required drivers. On top of that I think you need driver software to save data via the usb connector on the MD unit. Also this driver software can not be run on the MPC.
So you might as well stop hunting around for one, if you were planning to use it as a storage device for your MPC.