AKai MFC 42 LFO panning

Hi. I have a question for the MFC 42 filter users. If i sync the LFO to filter cutoff and route it to the stereo filter it pans the audio signal (in sync with the LFO) as well as modulating the cut-off frequency. Sounds pretty cool, but I'd like the option to turn the panning effect off. Is this possible?

Thanks in advance.

L-R PHASE knob at 0?...

MFC42 Operator's Manual, Page 15, wrote:Shifting LFO waveform with L-R PHASE (Stereo channel only)

Try rotating the L-R PHASE knob while the Groove Modulator is controlling the cut-off/resonance. As you rotate the knob, the pan changes cyclically as the phase difference of LFO waveform between the left and right channels becomes larger.

Note: The L-R PHASE knob is effective only while the cut-off/resonance is controlled by the LFO. No effect is observed while the Envelope is used.


When the knob is at 0 position, the left and right waveforms have no phase difference.

As you rotate the knob to the right . . . the phase difference becomes larger.

When the knob is at 180 position, their phase is inverted.

Why is this posted in a forum called 'getting started with MPC's?

Moved.