anyone in here who is using M-Audio Delta 1010LT ?

i was wondering if any of you have figured out how to use those two mic lines (the ones with the built in preamp).
i cant seem to find them i the control panel, weird though...
would be nice if someone could tell me wheren an how i enable them, thanx in advance...

i have it... the mic inputs cant take a condensor mic it can only take dynamic i'm pretty sure... i use to just put my condensor thru my preamp and then into the mic in on the 1010lt but it's sounds like shit to me cause it's like putting ur voice thru two different preamps, so instead now i jus put everything to my mixer and record my mic into the rca ins of the delta thru the main out of my mixer

out

dumpster why dont you just connect your preamp to one of the ins on the lt? buy a quarter inch to rca and go direct? or if your preamp has digital outs send those to the digital ins on the lt.
since you have the main outs on the mixer going to your ins you are incountering some problems, the first is... mixer space,
the second depends on what mixer you have but why put the vocals thru more signals by putting them thru the mixer?,
and third since you have your main outs on the mixer going to the 1010lt where are your monitors connected to? the outs on the lt? if so(unless you make your beats totally with software,but im sure you use a mpc), what do you do when youare making beats... how do you monitor it?, thru your headphones?or do you turn on your computer eveytime you want to make a beat and run everything thru it just so you can hear what your creating?


you get me?,basically what im asking is, why dont you go directly from your preamp to your lt ins?

my preamps has no digital and therefore i wont be able to hear the beat while rappin

*when rappin*
mic to mixer.
delta outs to mixer tape in
ctrl room out to delta in
(mind you i'm not sending the beat back with my vocals)
headphones in mixer

*when makin beats*
turntable to mpc record in
keyboard to mpc with midi
keyboard out to line 1 of mixer
mpc out to line 2 of mixer
mixer ctrl room out to delta in
mixer main out to monitors
headphones in mixer

i dont mix anything thru the actual mixer i mix in software, my mixer is just so i can connect everything and hear at the same time...

sorry when i said main outs i meant ctrl room
lol