For discussion about setting up your studio and advice on the gear and equipment within it.
Bykoo Mon May 31, 2004 7:13 am
I Have 1200 Bucks and im looking to buy A MPC Today which would U get the MPC1000,MPC2000xl Blue,Or a Used MPC2000xl white for 800 Bucks And whats the diffrents in The white ones and the new blue Ones other then the zip drive.
By LabWorkz Mon May 31, 2004 7:31 am
koo wrote:I Have 1200 Bucks and im looking to buy A MPC Today which would U get the MPC1000,MPC2000xl Blue,Or a Used MPC2000xl white for 800 Bucks And whats the diffrents in The white ones and the new blue Ones other then the zip drive.


~Only difference from the blue and beige XL is color! What else do u have in yur setup? Is the mpc the only piece u will have for production? If so I would get a XL but If u have some software programs u might want to look at the mpc 1000! But if u dont like to deal wit software I would get the blue XL wit the internal zip! :wink:
User avatar

By Cheech Mon May 31, 2004 8:12 am
If you're comfortable switching back and forth from your pc to you mpc, and you don't mind the smaller pads then go for the 1000.

If you don't want to use software with your mpc, and you like a bigger more sturdy machine then go with the xl.

By homershines Mon May 31, 2004 4:52 pm
Since I'm a cheapskate, I'd go for the used XL (make sure it's working well and see if it has 32MB ram, a zip drive and so on.) That would save about $700. With that I'd get some monitors or software for my computer like MPC Editor or MPCPGMMaker and some records or CDs or sample collections.

Peace.
User avatar

By Cheech Tue Jun 01, 2004 8:47 am
Or if you want to go for an even cheaper route, you could go with the 2000. It has no timestretching, but if you're really on a tight budget then it's worth looking into...

from www.mpc2000xl.com:

Summary of differences between MPC2000 and MPC2000XL

Both use same Effects board, 8-out expander and the sample engine between them is essentially the same. Many improvements on the Seqeucner section and a few added features in the sample editing area:

-XL sequencer memory increased from 100,000 events to 300,000

-XL dedicated Next Sequence button

-XL has 4 buttons for pad/bank selection vs the former 1

-XL can access 4 drum programs simultaneously, essentially making it 4 part multitimbral

-Number of samples stored doubled to 256 on the XL

-Folder support for storage on the XL

-XL can switch between sequences using the pads (just like the track mute/unmute screen)

-XL has SUDDEN button added to immediately switch to next sequence

-XL has 2nd sequence function allows you to associate another sequence to play simultaneously with current one.

-XL can solo from track mute/unmute screen

-XL can change sequences with program changes

-XL Device naming for each midi channel

-XL Midi monitor screen

-XL has improved multiple track recording by specifying which tracks to record and what channels for soft through

-XL Resample a sound with a different bit depth or sampling rate

-XL Zone mode allows you to select up to 16 zones

-XL Slice function. When samples zoned like above, you can automatically create new program (with pad assignments and with extra specified samples at end of each sample because of the sample decay ). (Sort of like Recycle, but you have to manual zone the sample)

-XL Timestretch function with slightly modifiable presets: 1. FEM VOX 2. MALE VOX 3. LOW MALE VOX 4. VOCAL 5. HFREQ RHYTHM 6. MFREQ RHYTHM 7. LFREQ RHYTHM 8. PERCUSSION 9. LFREQ PERC. 10. STACCATO 11. LFREQ SLOW 12. MUSIC 1 13. MUSIC 2 14. MUSIC 3 15. SOFT PERC. 16. HFREQ ORCH. 17. LFREQ ORCH. 18. SLOW ORCH.

-XL has automatic Chromatic assignment. Essentially allows you to create a keygroup across the key/pads from one sample.

-XL has internal IDE port so you can replace the floppy with a Zip drive.

-New List price of the XL is much lower than the new list price of the former model.

-XL has a swivel screen and comes in three color schemes.

-You can now switch from REC/OVERDUB to PLAY and vice versa without having to stop the sequencer.
User avatar

By binger0 Tue Jun 01, 2004 9:06 am
im so happy i got an xl.
User avatar

By Cheech Tue Jun 01, 2004 10:42 am
Yeah I've been using the timestretch more and more lately...
Dunno if I could do without it!

By elmacaco Tue Jun 01, 2004 8:48 pm
Given all the problems that occur with the 1000, and there are a wide variety, I would not recommend the purchase of a 1000 until the OS is sorted out and the bugs are gone (if that ever happens). So go with the XL, I would go used unless you like the blue better.
User avatar

By Cheech Wed Jun 02, 2004 7:28 am
Don't go for the blue one... You can get a used xl much cheaper and paint it yourself!
User avatar

By DOVESKI Wed Jun 02, 2004 4:41 pm
I like the 2K better than the XL, just a thought.
User avatar

By tgw617 Wed Jun 02, 2004 7:22 pm
why would you wait to get the 1000 till the os bugs are fixed when you can just upgrade to the new os. if you want the xl get the used one and paint it. put if u want the 1000 then get it. the bugs arent really a big issue i havent had ANY problems.
User avatar

By bidi Wed Jun 02, 2004 7:36 pm
DOVESKI wrote:I like the 2K better than the XL, just a thought.


why is that?

I have a 2k and i'd love to not be envious of an XL. please hook me up on some reasons so i feel better!