For discussion about setting up your studio and advice on the gear and equipment within it.
User avatar
By v00d00ppl Wed Mar 11, 2015 3:16 pm
I finally got my linnstrument and am getting a quad core macbook pro 15.4 logic pro x.

What audio interface should I get for it? I will use my xstation for the meantime if the drivers support it. My needs are 2 ins,2 outs, and low noise. Are there any mac audio interfaces that have an RCA in with RIAA class A preamps? My multi outs needs and analogue sound needs are taken care of my ssl xdesk so I need not worry about that.

Max budget is 1500.
User avatar
By jibber Wed Mar 11, 2015 3:47 pm
If you need only two inputs and outputs, there really isn't a much better recommendation than an Apogee Duet. There's no RCA inputs and no RIAA preamp, but you can buy a Cambridge Phono Pre with the money you saved on the interface.

Noise is non-existant on the Apogee Duet.
User avatar
By v00d00ppl Wed Mar 11, 2015 4:12 pm
Jibber,

How is the latency like when playing virtual instruments on it? I looked at the RME babyface and that can go down to 14 sample buffers.
User avatar
By jibber Wed Mar 11, 2015 4:20 pm
Ahh, i didn't realize you need Midi. There is no Midi on the Duet.
User avatar
By v00d00ppl Wed Mar 11, 2015 4:38 pm
jibber wrote:Ahh, i didn't realize you need Midi. There is no Midi on the Duet.


Well RME babyface it is my friend. Cheers.
User avatar
By jibber Wed Mar 11, 2015 4:57 pm
Let me know how you like it. I sold my Imac and will need a new interface at some point that'll run on windows. The babyface looks to be very good and is exactly what i need regarding inputs/outputs.
User avatar
By v00d00ppl Thu Mar 12, 2015 4:21 pm
@jibber I decided to be a beta tester and got a UA Apollo Solo to put my thunderbolt port through it's paces. Less than 2ms of latency for realtime beat mashing sure sounds good to me. I got it used so I got it for 550 US out the door.
User avatar
By jonestown massacre Thu Mar 12, 2015 6:29 pm
^was gonna mention the apollo twin duo, but dude sounded sold on the babyface. If I had to pick a portable solution, I would go with that.
User avatar
By medearis Thu Mar 12, 2015 9:38 pm
RME or Audient, hands down. Solid drivers/stability + room to grow. The iD22 has send/return per channel before conversion... dope.

You will be happy with your RME though! You made the right move.
User avatar
By richie Thu Mar 12, 2015 9:44 pm
The RME Fireface UFX is dope and can record on all its in's without being connected to a computer.

IE: Say you have 8 outs on your MPC, plug a usb thumb drive into the UFX and direct record all the 8 outs to wav files!
User avatar
By jibber Fri Mar 13, 2015 6:24 am
richie wrote:The RME Fireface UFX is dope and can record on all its in's without being connected to a computer.

IE: Say you have 8 outs on your MPC, plug a usb thumb drive into the UFX and direct record all the 8 outs to wav files!


Now THAT sounds dope! A setup without a computer at all (except for copying the wav file later from the USB-Stick), gonna check that out! Thanks! :smoker:
User avatar
By jibber Fri Mar 13, 2015 9:06 am
Ohh well, had a look... 2'000 bucks is a little hefty... I just need two inputs basically. recording wavs to a USB Stick would have been nice tho!

(sorry for double post)