By Malix_uno
Mon Oct 17, 2022 8:37 pm
Hello!
First post here.
I am looking for how to connect my MPC live output to the input of my Numark M2 mixer. I would ideally need a dual TRS 1/4 cable to dual RCA, but I don't see this cable exists. I see dual TS 1/4 to dual RCA exists, but I just purchased one and the unbalanced nature causes humming that I can't accept.
The only other option I see is for a 1/4 TRS cable to dual RCA, but then I would only be plugging the TRS side into either the left or right output of my MPC Live. I would likely then only have a mono signal set up and dedicated to the left or right output correct?
Is there anyway for me to have a stereo output from my MPC live to an RCA input in my mixer?
UPDATE: I connected an aux out to RCA from headphone jack on MPC LIVE to mixer and it works okay, but the quality of the recording is still not very clear... any ideas?
Thanks!
First post here.
I am looking for how to connect my MPC live output to the input of my Numark M2 mixer. I would ideally need a dual TRS 1/4 cable to dual RCA, but I don't see this cable exists. I see dual TS 1/4 to dual RCA exists, but I just purchased one and the unbalanced nature causes humming that I can't accept.
The only other option I see is for a 1/4 TRS cable to dual RCA, but then I would only be plugging the TRS side into either the left or right output of my MPC Live. I would likely then only have a mono signal set up and dedicated to the left or right output correct?
Is there anyway for me to have a stereo output from my MPC live to an RCA input in my mixer?
UPDATE: I connected an aux out to RCA from headphone jack on MPC LIVE to mixer and it works okay, but the quality of the recording is still not very clear... any ideas?
Thanks!