By Bertos
Mon Aug 07, 2023 9:48 am
Hello,
This is my first post and I hope it is in the right topis.
The problem in question is that when I sample on the akai s 900 everything goes fine, but when I turn it off and on again, a noise appears in the samples, like a beep that usually occurs at the end of the sample. Depending on the length of the sample this noise can appear while the sample is playing or at the end of the sample.
I've put a sample so you can hear the noise.
I have checked the RAM, but the test says there is no problem. I don't know if the problem is with the aki itself, the usb floppy Emulator, the disk image. I'm guessing it's more likely to be a problem with the akai s 900.
Please, someone knows the source of the noise and can provide a solution.
Thanks in advance.
[soundcloud][/soundcloud]https://soundcloud.com/ber2s/img-1276-audio-extractornet
This is my first post and I hope it is in the right topis.
The problem in question is that when I sample on the akai s 900 everything goes fine, but when I turn it off and on again, a noise appears in the samples, like a beep that usually occurs at the end of the sample. Depending on the length of the sample this noise can appear while the sample is playing or at the end of the sample.
I've put a sample so you can hear the noise.
I have checked the RAM, but the test says there is no problem. I don't know if the problem is with the aki itself, the usb floppy Emulator, the disk image. I'm guessing it's more likely to be a problem with the akai s 900.
Please, someone knows the source of the noise and can provide a solution.
Thanks in advance.
[soundcloud][/soundcloud]https://soundcloud.com/ber2s/img-1276-audio-extractornet