How To Sync MPC To Reason

I have my MPC 1000 synced up with Reason by a midi to usb cable. USB is going into the computer. It recognizes that they are synced up. When I hit a pad on the mpc, it plays whatever instrument is selected on Reason, and the sound comes out my computer speakers on reason. My actual speakers are hooked up to the MPC.

I want to hear reason instruments come out of my MPC, and it all be recorded onto my MPC... any advice?

Note, there is no audio interface, just a MIDI to USB cable.

To record the sounds from reason, use an audio cable linking you computer outs to you MPC record ins.

MIDI connections do not transfer audio. Only MIDI data. If you want the actual sounds in your MPC you will need to sample them. If you check google there may be some unpacking software that can extract the refills but Im not sure

You could go to Radio Shack and pick up a 1/8" stereo headphone jack-to-RCA cable and run your computers headphone jack right into the MPC. You may need some RCA to 1/4" adapters.

Examples:
http://www.radioshack.com/product/index ... Id=2110512

or

http://www.radioshack.com/product/index ... Id=2110497 + http://www.radioshack.com/product/index ... Id=2103711

If I got an audio interface, would it work then? I dont wanna go through the trouble of sampling sounds in Reason. This is just to hold me over til I can get a nice keyboard.

I Was also curious about this subject as well...i seen the old post...just looking for feedback..thank you

didn't there used to be a sticky about this?

if so would anyone who finds it be so kind as to post it here...thank you...