Post your questions, opinions and reviews of the MPC1000. This forum is for discussion of the OFFICIAL Akai OS (2.1). If you wish to discuss the JJ OS, please use the dedicated JJ OS forum
User avatar

By Andrizzle Tue Oct 10, 2006 12:22 pm
Yezir!
User avatar

By MoneyOverEverything Sat Oct 14, 2006 2:12 am
ok ok.. i use my laptop to store all of my samples.. and i just move them to the mpc through the usb.. so really i dont need a cf card.. becuase i store everything in my laptop.. and on my laptop external usb drive... i have plenty of memory there.. so im ok on the cf card right?
By marr Sat Oct 28, 2006 12:01 am
Kingston ValueRAM 256MB 144-Pin SO-DIMM PC 133 (CL3) Notebook Memory

Ends up being around $37 w/ three-day UPS to lower 48

http://www.newegg.com/product/product.a ... 6820172003

Model
Brand Kingston
Series ValueRAM
Model KVR133X64SC3/256
Type 144-Pin SO-DIMM
Tech Spec
Capacity 256MB
Speed PC 133
Cas Latency 3
Voltage 3.3V
ECC No
Buffered/Registered Unbuffered
User avatar

By GREEDRA Sat Nov 18, 2006 1:52 pm
i just bought a 1GB cf card that works on Ebay, brandnew for $9.00

http://search.ebay.com/search/search.dl ... arch&fgtp=

this is the guys store view...the DAN-EO 1GB work in the 1K...no problems at all.

i've seen them go for likr 6 bucks.

Hope that helps.

By BBOY931 Mon Nov 20, 2006 4:35 am
check this thread also. i have been using a micro drive they are cheaper on ebay and you get up to 8gb i currently use a 4gb one from an old ipod mini. search ebay for a microdrive cf

http://www.mpc-forums.com/viewtopic.php?t=61541
By sselemanONE Fri Nov 24, 2006 5:15 am
So what I'm getting from all of this... is that the max CF card we can use with the MPC1000 (with the factory memory of 16mb) (which is ridiculous) is 256MB.. of which we can only utilize 128MB?

Yet i saw at least 3 posts on here with kats using 2GB CF cards... if i could use a 2GB cf card obviously i choose that.. but i need to figure this out soon.. cus i'm going to be purchasing a new CF card this week.

schollar

By detomasso Fri Nov 24, 2006 9:57 am
Another huge Kingston RAM success!
I got my brand new MPC1000 BK 1 week ago. After 1 week I could find a ram module in my city which I need (though it wasn't easy). Brand new, boxed.

Check this:

KTH-OB4150/256
256 MB
SDRAM
SO DIMM 144-pin
100 MHz ( PC100 )
1 x memory - SO DIMM 144-pin
Lifetime manufacturer warranty

It has 8 blocks on each side.
Now it's confirmed: you don't have to worry about the mhz. It can be 100 or 133. The truth is that you can't really feel the difference between the 100 and 133 mhz modules while loading samples. Though someone could make a 'testrun'. DDR's won't work.

So this module works perfectly. And I am happy like this: :-)

By Dannyproc Fri Nov 24, 2006 2:12 pm
Kingston ValueRAM 256MB 144-Pin SO-DIMM PC 133 (CL3)

from the uk. got it from amazon for £32 or something. saved 70 quid, so thanks for this guys!

By quarius_quaise Sat Dec 02, 2006 3:49 am
Is there any way to bypass the memory check at boot up? I've tried the Kingston KVR133x64SC3/256 with no luck. I've tried about half a dozen other memory modules with no luck either.

Frustrating :(

I just bought my mpc (black version)...I'm wondering if there has been a change in the hardware that restricts the acceptable RAM to an even more limited selection.

Thanks...
User avatar

By Mr modnaR Sat Dec 02, 2006 7:52 am
you sure you clicked the RAM in place properly? it takes quite a push (within reason, of course, you don't need an elephant to sit on it for example)

By quarius_quaise Sun Dec 03, 2006 6:13 pm
Yup, I clicked the RAM in properly (I've installed RAM into many a laptop computers before).

I'm starting to think there's something wrong with my unit as I bought the actual RAM upgrade from Akai. But then again the RAM box looked damaged....
User avatar

By Mr modnaR Sun Dec 03, 2006 6:17 pm
hold on, you say you have the Akai RAM upgrade, and another brand?
User avatar

By dango Sun Dec 03, 2006 7:14 pm
aloha,

so just to get this straight, the ram i installed allows me 12 minutes recording time, when i power up the mpc it says 128mb ram installed. so the mpc is only using half that? so when i power up the mpc it could say 256mb installed if i had a 256 chip in there? which would give me 24 minutes recording time? so i obviosly have just a 128 mb chip installed. bought it from ebay, new kingston ram, works fine but 24 minuted would be mo betta.

d~