Antonym wrote:this is a bug report for os 12
which you don't seem to have, as 12 does allow you to assign samples via loading.
as for the first problem, i couldn't replicate it.
download 12. b
Pendulum wrote:Don't know if you did this already, but it seems you need to enable the "Pad Assign" option. Just hit the Window key in Load mode and turn it on.
Works in this new Beta 13 anyways
p.
Rise of EPC wrote:bigman wrote:A new bug has spawned from an old bug. The track 61-64 sample time problem has been attempted to be corrected and improved in this beta according to the bug fix notes, but the end result is now worse.
Here's what is going on. I loaded beta 11 and immediately went to track 61 to see what has been changed or fixed. I set my recording preferences (tr+window), set the bars to 2 and the tempo was left on 120. I then pressed overdub and play start to begin recording.
The first improvement I noticed was that when you press overdub or record, a small window pops up on the screen telling you your selected recording input(s) and the name of the take that is about to be recorded. After engaging record, I waited for the 1 bar count in and played guitar for four bars instead of two. This is where the second improvement comes in, the MPC now asks if you would like to change the bars of the sequence to match the bars of recorded material, or leave it alone to loop at whatever amount of bars you already have set.
Now here is the bad part, the sample records the count in period and still has the small bit of extra time that created the original problem. So, when you play back your phrase it now comes in 1 bar and about 1/8 note late. What makes this worse still is that the new trim window does not let you easily select exact amounts of time to discard in order to work around this.
This means that there are now two pretty big bugs, where only one small one used to be. So, here are the preliminary bugfix reports I am planning to send to the author. I am posting them here first to see if anyone has any suggestions to more clearly state the problems so they can get fixed properly.
Bug 1:
1 power sources ON→ (unused) selecting the sequence
2 enter trim mode (Mode+Pad6)
3 (problem) user cannot select numeric entry
4 (problem) user cannot select increments of movement without zoom
5 (problem) zoom and increment level are not standard, but dependant on sample length
6 (problem) zoom in and out are inconveniently located if needed to edit properly, zoom in and out should also be selected by using (shift+<cursor = zoom out) and (shift+>cursor = zoom in)
Bug 2:
1 power sources ON→ (unused) selecting the sequence
2 select track 61-64
3 set recording preferences in (Tr:+Window)
4 press record using (rec+play start) or (overdub + play start)
5 after metronome counts in, record a take and press (stop) when finished
6 press (play start) to replay take
(bug) recorded take has count in time as well as the original small gap (approx 00.011.700) included in the sample
(bug) due to the restrictions of the new trim window, user is not able to select exact increments of time to edit from the sample, which now makes this problem virtually incorrectable to the user.
Dang.. i FINALLLY got track recording to work for me!
with my tables.
all other versions were all wacky when id try it. ive tried so many different ways i was discouraged... i decided to try again with beta 11. walla!
no delays.
EDIT>>>> EHHHHH... its being goofy again.
