By zapadlaw
Sat Aug 29, 2009 5:13 pm
Hi all, i have a problem with record main out:
there is delay 100 ms in recorded sample. first - click, snap or something, then 100 ms of silence and then sound starts.
Oneshot's is fine. Tried to set threshold to 0 - no signal at all, Tried set to -63 - delay increased to 1 sec. Tried mono - all same.
P.S. about digital I/O - i have 0404 usb, i bought good coax 75 ohm cabels, plugged everything correctly, in control panel set 44.1, External, s/pdif but INT EXT indicators on my card are lit as if nothing is connected. Tried connect 0404 spdif in to julia spdif out with same cabel - all works fine. What could happen with digi i\o on mpc?
P.P.S. Sorry for bad eng
there is delay 100 ms in recorded sample. first - click, snap or something, then 100 ms of silence and then sound starts.
Oneshot's is fine. Tried to set threshold to 0 - no signal at all, Tried set to -63 - delay increased to 1 sec. Tried mono - all same.
P.S. about digital I/O - i have 0404 usb, i bought good coax 75 ohm cabels, plugged everything correctly, in control panel set 44.1, External, s/pdif but INT EXT indicators on my card are lit as if nothing is connected. Tried connect 0404 spdif in to julia spdif out with same cabel - all works fine. What could happen with digi i\o on mpc?
P.P.S. Sorry for bad eng


