MPC1000 JJos + DAW + midi

hello, i'm from poland. sorry for my english
i bought this cable:

i don't have any drivers or something like that.
i would like to connect my MPC 1000 with free jj os to my DAW (Cool edit pro 2.1 or Fruityloop 7), with this cable.
it is possible? can someone write how can i do this (step by step)?

edit:
can i rip the sounds through this cable?

this cable is for for midi. You will be able to sync your daw and the mpc and trigger events between the two. Check the sync and midi setting in you DAW and in the MPC to do this.

Audio does not pass through this cable only data.

Read the manuals.

Have fun!

dude

thx for answer on my question.
so, can someone tell me how can i setup mpc and daw?

How to Setup a Midi Controller in FL Studio
After installing your drivers, and making sure your controller is plugged in, open up FL Studio. Go to "Options" and click "Midi Settings" (or hit F10).
Your controller should be listed under "Output" and "Input". Click on the your midi controller on your output and then enable "Send master sync", by simply clicking the option (the box should turn orange). Also click on the listed midi controller under input and click "Enable".

If you do not see your midi controller listed, click "Rescan MIDI devices" - this should fix the problem. If it does not, make sure you have properly installed the drivers, and that you have correctly plugged in your controller to your computer or interface. If it still does not work you should contact the manufacturer of the keyboard, or look into their troubleshooting.
Once you've got your controller enabled, load up some sounds and hit some keys. If you hear something...congratulations! You have successfully set up a midi controller with FL Studio

hope this what your looking for

on the mpc you just go midi sync. and set the midi in/out puts