pads, as always

Hi,
I got used MPC 1000 (black version with black I/O panel) with JJOS 2 Xl ver. 3.11 installed. When i'm hitting pad 1 it sometimes plays sound from pad 1 and sometimes from pad 7. Pads 2,3,4,5,6,7,8 has the same problem. Other pads are working good.
I tried to restart settings but there's no effect. I also tried to look inside, so i pulled off the pads and tested the sensors. The effect was the same even without pads. Is that the moment to upgrade my pads, or there's a other way to fix that ?
Michael.

adjust your sensitivity settings first.

**** wrote:adjust your sensitivity settings first.

Good idea. I checked it and have tried few configurations but it still happens.

did you change pad on level? that's going to be the one that matters. turn it to 16 or higher.

however, it does sound like there may be an issue with your sensor array. better to be sure though.

Nym wrote:did you change pad on level? that's going to be the one that matters. turn it to 16 or higher.

however, it does sound like there may be an issue with your sensor array. better to be sure though.

That's it ! I finally fix it, thanks for support !

The problem came again. I have installed JJ OS2 XL ver. 3.16 and everything was OK about 1 month and now I got the same problem with pads 1-8. I don't know what happend. I tried to fix it in Mode+other -> pad, but there's no result.

Any ideas ?

Popisbeatz wrote:The problem came again. I have installed JJ OS2 XL ver. 3.16 and everything was OK about 1 month and now I got the same problem with pads 1-8. I don't know what happend. I tried to fix it in Mode+other -> pad, but there's no result.

Any ideas ?

this page will help explain what i couldnt just now

http://www7a.biglobe.ne.jp/~mpc1000/s_pad_e57.htm


ALWAYS check the jj0s site and LAMPDOGS helpful links before posting similar questions on the forum (or so im told!).


That sounds like your issue, you have pads triggering other pads.

let me know if it helped

Thanks for this. Actually I just have cleaned it up and everything works perfect right now