By basiqproductions
Sat Aug 08, 2015 8:59 pm
Every single output, analog outs 1,2,3, and 4, digital out, stereo out, and my headphones only release a low hum. All were tested directly to my speakers, headphones, and mixer, none of which are the problem. The record in only receives a signal when the main volume knob is at a specific spot (very low) and at that position I hear some sound but it is distorted and inaudible. Pad to internal sound is on. I have auditioned many sounds on my HD, my CF card, record ins from my turntable, and various synths, in all cases the mpc acts the same. No sound is outputed except a quiet distorted signal when the main volume knob is at a certain point. This suddenly happened for no specific reason. The ram is 128mb and every board inside is new while running jjos1 4.99. Fat pads and the pad upgrade is installed as well. It is the model with the black faceplate. I've read the manual 10 times over and googled it too death but can not find an answer. The voice monitor shows I have sound playing but I hear nothing but a low hum on every output. There has been no issues prior and at the time the sound cut out I was adding hats to a new beat. Nothing from the HD, CF, (internal is empty and has been) and beats I've finished are audible, only a hum. Everything is on stereo out so I should hear it. Please Help I have a live gig this coming Saturday as well as multiple beats I've not been able to work on