By StayKrushN
Sat Feb 27, 2016 8:01 am
I want to sidechain my Kick drum from the MPC 1000 in realtime, to the bass outputting from my Moog Sub Phatty, so that when the kick hits, the Moog cuts out.
The MPC 1000 has 4 assignable outs + stereo out. A Moog Sub Phatty is feeding mono channel #1 of a Mackie Onyx 1220i. The 1220i has 4 "inserts" for each of it's Mono channels.
Do the assignable outputs of the MPC 1000 only output sound when you're in the mixer screen, or do you assign pads in the mixer screen one time and go back to making your music and instead of said pad playing through the MPC's main Stereo Output, it only plays through whatever Assignable Output you chose in the mixer screen?
I currently don't own the 3630, but if it could help me achieve this, I'd pick one up asap.
Currently I have the hookup as following:
1x Sub Phatty mono out -> 1220i mono channel input 1
1x MPC 1000 stereo out -> 1220i stereo channel 5/6
1x Mackie Onyx 1220i, has 4 "Inserts" for the first 4 Mono channels of the mixer
I'm confused mainly because I don't know if I assign the Kick to an Assignable output on the MPC Mixer screen, if it will output audio when I exit the mixer screen and continue working on the song.
thanks so much
EDIT: I found this thread (PSR's comment about half way down), but it's more about sidechain what is in the MPC and sending the output of the compressor back into the MPC's Record In. That's not what I'm after. It's similar though.
http://www.mpc-forums.com/viewtopic.php?f=5&t=152372
The MPC 1000 has 4 assignable outs + stereo out. A Moog Sub Phatty is feeding mono channel #1 of a Mackie Onyx 1220i. The 1220i has 4 "inserts" for each of it's Mono channels.
Do the assignable outputs of the MPC 1000 only output sound when you're in the mixer screen, or do you assign pads in the mixer screen one time and go back to making your music and instead of said pad playing through the MPC's main Stereo Output, it only plays through whatever Assignable Output you chose in the mixer screen?
I currently don't own the 3630, but if it could help me achieve this, I'd pick one up asap.
Currently I have the hookup as following:
1x Sub Phatty mono out -> 1220i mono channel input 1
1x MPC 1000 stereo out -> 1220i stereo channel 5/6
1x Mackie Onyx 1220i, has 4 "Inserts" for the first 4 Mono channels of the mixer
I'm confused mainly because I don't know if I assign the Kick to an Assignable output on the MPC Mixer screen, if it will output audio when I exit the mixer screen and continue working on the song.
thanks so much
EDIT: I found this thread (PSR's comment about half way down), but it's more about sidechain what is in the MPC and sending the output of the compressor back into the MPC's Record In. That's not what I'm after. It's similar though.
http://www.mpc-forums.com/viewtopic.php?f=5&t=152372