.wav loading problem

Anyone had this problem? I used mpc1000 program creator to import a recycle file, then transferred the created program and recycle .mid file to the mpc. For some reason, two out of the 10 chopped .wavs that load into the pads do not play back properly. The timing of the overall sequence, when played, is fine (other than missing those 2 samples). I tested the individual .wav files on the CF card in my pc and they all played perfectly. When I tried to load individual .wavs from the card into the MPC, though, those same 2 files glitched up (i.e, loaded as some weird whining noise). I've got OS 1.06

have no idea, try using BlueBox, and upgrade to 1.07 and try taking your time.

I've seen that problem before. How to fix it? Don't know. I also have a problem when transferring wav with pgm's from a mac I get a digital noise at the end of the wav files for some reason. When I transfer from PC it works but for some reason The files are bigger on the card than on the computer.

I figured out how to get the wav file on the MPC without the noise. Use a PC. I currently use a PowerMac and when I transfer from the mac to the mpc I get the noise. I hope it helps.

I'm actually using a p.c. I took penfold's advice and upgraded my O.S. and I haven't had the .wav loading problem since. Good looking out.