
By tvent
Wed Feb 04, 2009 3:36 am
From your list of equipment above, you "could" use up 4 channels of a mixer with your MPC alone. Also, if you want to hook up a turntable you will need a mixer with a phono pre-amp (or an external DJ mixer, or an external phono pre-amp.) So, that will take up another two channels right there, now you are up to six. Add in one microphone and now you are at 7 channels. Now if you add a keyboard/synth you will either have to juggle channels or run it mono if you have an 8 channel mixer, and we haven't even reserved at least two channels for you to monitor back your laptop.
As you can see, mixer channels can add up fast, and this doesn't factor in what you need if someone comes over with THEIR equipment.
I would say, total up how many you need right now or in the immediate forseeable future and then bump up one size from that if you can. In my example above, I would not hesitate to buy a 12-channel mixer.
Now, the next question is, how many channels of audio do you expect to be able to record into your laptop/DAW at one time?
If more than two, then you will need to move up to a 4-buss (or more) mixer.
Also, this is just my opinion, but I would steer clear of anything that says "Behringer" on it.
There's a reason it looks just like a mackie but costs 1/3, and it ain't just because they've figured out how to exploit global supply chaining.
Does anyone on here have any experience with this board:Soundcraft Compact10? It has 10 channels, but 6 of them are STEREO channels (which technically adds up to 16 channels) and it also has a phono-preamp. From a connectivity standpoint it looks great, but I have never seen one in person and have NO IDEA how they sound. I do know that Soundcraft makes some good sounding stuff on the upper-end, but do not know about their lower-end lines. Anyone?
As you can see, mixer channels can add up fast, and this doesn't factor in what you need if someone comes over with THEIR equipment.
I would say, total up how many you need right now or in the immediate forseeable future and then bump up one size from that if you can. In my example above, I would not hesitate to buy a 12-channel mixer.
Now, the next question is, how many channels of audio do you expect to be able to record into your laptop/DAW at one time?
If more than two, then you will need to move up to a 4-buss (or more) mixer.
Also, this is just my opinion, but I would steer clear of anything that says "Behringer" on it.
There's a reason it looks just like a mackie but costs 1/3, and it ain't just because they've figured out how to exploit global supply chaining.
Does anyone on here have any experience with this board:Soundcraft Compact10? It has 10 channels, but 6 of them are STEREO channels (which technically adds up to 16 channels) and it also has a phono-preamp. From a connectivity standpoint it looks great, but I have never seen one in person and have NO IDEA how they sound. I do know that Soundcraft makes some good sounding stuff on the upper-end, but do not know about their lower-end lines. Anyone?


