
By RundFyrkant
Mon Feb 06, 2006 5:40 pm
this is as brief as it gets
http://www.amazon.com/gp/reader/0793530 ... eader-link
http://www.amazon.com/gp/reader/0793530 ... eader-link

By Jacpot
Mon Feb 06, 2006 5:40 pm
You need to plug the keyboards outs into the mixer as well as the mpc. And make sure your midi connections are right.
*Midi doesnt transmit sound
*Midi doesnt transmit sound
CHOP SMALL!!
Jac The Ripper
http://www.arrogantempire.com
Follow me on Twitter @supbishes
Dark ***** Squad
Jac The Ripper
http://www.arrogantempire.com
Follow me on Twitter @supbishes
Dark ***** Squad
By M.ic P.ro C.rusher
Mon Feb 06, 2006 6:27 pm
Do you have the out of the triton to the in on the MPC AND the out of the MPC to the in on the Triton?
To record on the MPC, the Triton need to output to it (Triton out to MPCin)
For the MPC to trigger the recorded notes on the Triton, the MPC need to be outputted to the Triton (MPC out to Triton in)
To record on the MPC, the Triton need to output to it (Triton out to MPCin)
For the MPC to trigger the recorded notes on the Triton, the MPC need to be outputted to the Triton (MPC out to Triton in)

By Mr modnaR
Mon Feb 06, 2006 6:44 pm
M.ic P.ro C.rusher wrote:Do you have the out of the triton to the in on the MPC AND the out of the MPC to the in on the Triton?
To record on the MPC, the Triton need to output to it (Triton out to MPCin)
For the MPC to trigger the recorded notes on the Triton, the MPC need to be outputted to the Triton (MPC out to Triton in)
but you also need the triton to be connected to a mixer so you can hear it.

By Mr modnaR
Mon Feb 06, 2006 7:18 pm
resample the triton back into itself? or sample the triton into the mpc?

By Lampdog
Mon Feb 06, 2006 7:29 pm
I'm lost, I was trying to follow along but not enough info about the WHOLE setup is being dropped.
By king360
Tue Feb 07, 2006 12:11 am
I have everything connected to the mixer and midi etc.....
I can hear the triton sounds in sequences.....
I cannot when the sequences are converted to song mode...
I can hear the triton sounds in sequences.....
I cannot when the sequences are converted to song mode...
KING360

By Jacpot
Tue Feb 07, 2006 12:29 am
king360 wrote:I have everything connected to the mixer and midi etc.....
I can hear the triton sounds in sequences.....
I cannot when the sequences are converted to song mode...
oh!!! i know what u mean. Happend to me a few times matter of fact. The mpc acts strangely sometimes with synths. Like it wont show all the notes in step edit either. Not all the time but it happens sometimes.
I just use the Next sequence button to get around this. Song mode does do that sometimes though
CHOP SMALL!!
Jac The Ripper
http://www.arrogantempire.com
Follow me on Twitter @supbishes
Dark ***** Squad
Jac The Ripper
http://www.arrogantempire.com
Follow me on Twitter @supbishes
Dark ***** Squad



