Using A Micron with MPC1000

I've been trying to get this figured out for hours now and have searched through the forum & both manuals. What I'm trying to do is record tracks using my micron with the sounds from within the micron. I have them doin' the "midi handshake" and I have the audio out from the micron going to the record in on the mpc(which I think is only used for record mode). If anyone could tell me what connection or setting I have mistaken it would be much appreciated. I'm able to record the synth, but I would like to play it naturally during a track. Thanks in advance.

I think I might be trying to do the impossible. The samples I think need to be saved in the MPC...but if this is the case, what are the techniques some of you are using to record your synths? I was trying to keep it between my MPC and Micron but it looks like I'm gonna have to record directly into Cubase. Sorry if this seems retarded but this is my first experience using a keyboard with it's own sounds.

check it you got the cables correct. now its all configurations...check it...1. go into the mpc midi/sync mode and select Active Track:All OMNI-A(or B dependin on which Midi in out u usin) sync in and out 1(OR2) AND a(OR b)..tHEN ON mpc MAIN WINDOW SELECT tYPE:midi PGM:OFF OR nO 1(OR 2,3,4, ETC..) midi:1a OR 1B OR 2a OR 2B(THIS DEPENDS ON THE MIDI IN AND OUT U USIN ON THE MPC)...THATS ALL FOR THE mpc NOWMOVE ON TO THE ALESIS MICRON...yOU HAVE TO MAKE A SETUP AND SPLIT THE PARTS(READ THE ALESIS MANUAL-TO MUCH TO EXPLAIN)ANYWAY WITH THE SETUPS PART aIS midi 1A OR B PART b(ON SYNTH) IS AKAI MPC MIDI2A(OR b) C IS 3A(OR b),ETC... THIS IS CALLED MULTI-TIMBRAL MODE--THE MICRON IS 32 PARTS MULTITIMB AND THE mpc IS 32PART COMPATIABLE IE 1-16a AND 1-16b(16 AND 16=32) NOW ON THE MICRON PRESS CONFIG GO TO LOCAL(TURN IT OFF) THEN GO TO MIDI CHANNELS START AT 1, MIDI CHAN MODE-mULTI,MIDI PGM CHANGES:SEND=RECEIVE,mIDI SYNC:eXTERNAL....AND THER U HAVE IT..iF U DONT FULLY UNDERSTAND WHAT I SED(IM BLAZED N EXTREMELY TIRED32 HRS STRAIGHT WIT A FEW 20 MIN BREAKS WERKIN ON 2BANGERZ--u CAN EMAIL OR PM ME FOR MORE INFO---gOODlUCK....

Thanks for the reply...I'm gonna take what I can from it and try to figure this out...but again I appreciate it.