MPC1000 PRO TOOLS MIDI SYNC PROBLEMS

What up everyone, now I know theres been a million posts on this subject, trust me, I've read every last one of them but i'm running Pro Tools LE on an MBOX, with a MPC 1000 and i'm using an M-Audio MIDIsport UNO USB-MIDI interface... I have the settings on my MPC set correctly in the sync menu. I have my MIDI Beat Clock Settings set correctly in Pro Tools for my m-audio usb-midi interface. When I press Play/Record in PT my MPC still doesn't act as a slave and start playing, I've read a million posts and tutorials on this and can't figure the problem out... Somebody please help!!!! hahaha...

Tef

www.myspace.com/27deep
AIM - teflon27deep

I am having the same problem. I can here my beat in Protools through an aux channel... but when I go to record in Protools my MPC still doesn't act as a slave and start.

Welcome to both of you.

hahaha, thanks for the welcome... anyone got any suggestions on what I should do??

this is for the 2kxl but lookin at the 1k manual it seems to be pretty much the same...


Click on the MIDI tab in PT> click on MIDI Beat Clock> check Enable MIDI Beat Clock for... > check the appropriate midi device> click OK> click on the Setups tab> Peripherals> Machine Control> check Enable and select the correct midi device> click OK

On the MPC press SHIFT/9(MIDI/SYNC)> select the input you have the midi cable from the midi device connected to(1 or 2)> switch Mode: to MIDI CLOCK> switch Receive MMC: to ON

Make sure to set the tempo in PT to the same tempo as the sequence in the MPC.