Exchange tips and tricks for the Akai MPC4000
User avatar

By DaSoof Thu Jan 06, 2005 11:01 pm
i cant really do that coz i got an external zip drive conected to my mpc.

Is there like a special USB conection which allows u to conect 2 inputs into one? for example my zip drive and a keyboard both being conected to my mpc?
User avatar
By Kid Captain Coolout Fri Jan 07, 2005 6:28 am
That's an interesting question you just asked. Has anyone used a hub on their front panel USB port?
User avatar

By Rob Fri Jan 07, 2005 8:00 am
To connect several USB devices to a single port, you get a USB hub. They're available in all sorts, from two-port to 8-port flavors. The bigger ones need their own power, the smaller ones often feed off the power available on the USB port. Costs somewhere between $20 and $60.

But make sure you can try before you buy. Some hubs could not work, just like some keyboards don't.
User avatar

By DaSoof Fri Jan 07, 2005 2:58 pm
thanx
"USB hub"
Ill keep that in mind.
User avatar

By ikke Fri Jan 07, 2005 4:27 pm
I have a D-Link USB hub and it works great. I can connect a mega steno, an external USB hard disk, a qwerty keyboard etc .. all to the same port.

Tho the USB connectioon on the front of the MPC is really poor. It will break soon I guess.. What an odd place to build an USB port :roll:
User avatar

By DaSoof Fri Jan 07, 2005 6:26 pm
ikke wrote:I have a D-Link USB hub and it works great. I can connect a mega steno, an external USB hard disk, a qwerty keyboard etc .. all to the same port.

Tho the USB connectioon on the front of the MPC is really poor. It will break soon I guess.. What an odd place to build an USB port :roll:

u should get 1 of these
http://www.prolog.biz/presse/lindy/img/USB-Hub.jpg

i dont think it would put any pressure on the mpc coz of its cable
User avatar

By ikke Fri Jan 07, 2005 10:36 pm
aah yes.. without a power supply. Thats more handy, indeedy! :)